In this episode, George Oliphant visits a handful of amazing families, including Mets super-fan Danny Marquino. We surprised him with a touching home renovation during the pandemic and now was able to give him an unforgettable experience at Citi Field! George also revisits the heroic Martinez parents, and surprises them with a CrossFit challenge. Back in 2013, George and team created a new and safe space for the Boys and Girls Club of Newark, NJ – and now he returns for an exciting and inspirational exterior project. Our last revisit is to Medinah “Science Teacher Mom” Eatman, to see how donations have impacted their school system and STEM program.
Whether you're doing a quick project around the house or a full renovation, it's likely you'll run into several problems along the way.
In this episode of "George to the Rescue," George Oliphant revisits a handful of amazing people he's met and helped renovate their spaces, including the wonderful folks at the Boys & Girls Club of Newark, New Jersey back in season 13.
Watch NBC6 free wherever you are
>
George and his team turned one of the larger spaces in their community center into a multi-functional teen lounge.
One of the problems you'll likely see when remodeling older spaces like this one is stripped screws.
Get local news you need to know to start your day with NBC 6's News Headlines newsletter.
>
A stripped screw is when the small slots in the head of a screw have worn out, making it difficult for a screwdriver to grip the screw and turn it. Most stripped screws are usually old ones that have been in place for a long time. However, you can also strip a screw by overtightening it, even if it's a new screw.
Screwdrivers are a great tool, but they may not work to remove stripped screws.
Here are some other ways to remove a stripped screw when a screwdriver doesn't do the trick.
Step 1: Use a drill
Grab a drill bit that's used for metal and at a low speed, drill a hole into the head of the screw. (The low speed should prevent the screw from breaking or splitting.) Drill until you feel the bit catch, then put the drill in reverse to remove the screw.
Step 2: Use pliers
If the stripped screw is above the surface, use either locking or vice grip pliers to get a strong hold on both sides of the screw. Gently twist left to right until the screw is loose enough to pull it out.
Step 3: Try a rubber band
Surprised? A rubber band can add traction to help do the trick. Place part of the rubber band over the head of the screw. Then take a screwdriver and insert it into the rubber band and turn it counterclockwise to remove the stripped screw.
Step 4: Grab a hammer
Take a flathead screwdriver and insert it into the slot of the screw. Then use the hammer to carefully drive the screwdriver down deep enough to catch it. Then you should be able to twist the screwdriver to remove the screw.
George to the Rescue
Be sure to check out the full "George the Rescue" episode for more renovation inspiration.
Some of the tips mentioned above were sourced from The Home Depot.
And watch more full episodes of "George to the Rescue" here:
